Most Estate fencing is painted black but we can use any colour on the RAL paint chart and we have used many colours over the years and would be happy to discuss and advise. In any case, the steel bars are shot blasted and treated with an anti-rust primer before it arrives on site. We then re-prime after welding and spray paint the fence 2 topcoats on site once fitted. Whilst this provides very good anti rust protection please note that paintwork on both wrought iron and mild steel Estate fencing requires maintenance every few years.
Before finalising your design and starting the manufacturing process, we will discuss the project with you in detail, its purpose and your specific requirement, (ie is the fencing for stock, for driveways, for garden boundary) We will then usually make a site visit to survey the ground and to meet and discuss options with you personally. This is crucial to delivering exceptional Estate fencing and enables us to fully assess the conditions of the ground and to make sure the fence specification is right. It also means we can ensure the appropriate gate positions.
Our aim is to fit a stunning parkland fencing solution that exceeds your expectations and lasts for generations to come. So, with the performance of traditional Estate fencing largely depending on the quality of the installation, all of our fences are put in at a minimum depth of 2ft and deer fencing min 3ft. We never compromise on this – even when the ground is particularly hard; in some cases, other installers will opt for a shallower fitting fence, (and modular fencing is usually only 12-14”) resulting in a fence that is more likely to collapse.
We have been in business for 40 years, manufacturing and installing high quality Iron & steel work of all kinds.
We have an in-house team of design engineers, fabricators, & blacksmiths and expert fencing installers with over 40 years experience.
We have worked in all parts of the country, in Europe and Scandinavia, installed fences and railings in all kinds of conditions in all kinds of ground and we love a challenge.
Construction of our continuous welded Estate fencing is completed on site. Posts are driven 600- 900mm deep,6m lengths of solid bar are threaded in a staggered pattern to ensure no fence upright carries all the joints. Welds are cleaned, prepped and painted on site with a high content zinc primer and two topcoats.
The result is a traditional seamless fence with no visible joints, linking collars or clips. This means greater strength and flexibility, and a fence that will hug contours and follow graceful natural curves, or clean tight circles, or the shape of a driveway/ entrance. This is the real thing, not to be confused with the ‘Modular’ Estate fencing which is usually imported and sold in kit form, and we will guarantee its longevity.
Gates
TERMS & CONDITIONS
OUR RESPONSIBILITY
We will not be responsible for any losses resulting from your use or the inability to use our website or resulting from unauthorised access to, or alteration of your transmissions or data in circumstances which are beyond our control.
We will not be responsible for your loss of profits, wasted expenditure, corruption or destruction of data or any other loss which does not directly result from something we have done wrong.
You will be responsible if you use this website in breach of these terms of use and using this web site you agree to reimburse us for any loss that you cause us as a result of any such misuse.
We make no promise that our website will be uninterrupted or entirely error free. Because of the nature of the Internet, the shopping online service is provided on an "as is" and "as available" basis. We are not responsible to you if we are unable to provide our Internet services for any reason beyond our control.
We will use the information which you provide and the records of items you buy to constantly monitor and improve our service and for marketing purposes in accordance with our Privacy Policy.
No data provided on the site by you is supplied to third parties in anyway.
We may change or withdraw any part of our website, or may refuse you access to the website at any time if we consider it necessary.
These terms are governed by the laws of England and Wales and any disputes will be subject to the exclusive jurisdiction of the courts of England and Wales.
If you require more information please contact:
Britannia Metalwork Services Ltd
Units N1-N4 Andoversford Link
Andoversford
Cheltenham
Glos
GL54 4LB
t: 44 (0)1242 820 582
E-mail: info@britannia.uk.com