Most Estate fencing is painted black but we can use any colour on the RAL paint chart and we have used many colours over the years and would be happy to discuss and advise. In any case, the steel bars are shot blasted and treated with an anti-rust primer before it arrives on site. We then re-prime after welding and spray paint the fence 2 topcoats on site once fitted. Whilst this provides very good anti rust protection please note that paintwork on both wrought iron and mild steel Estate fencing requires maintenance every few years.
Gates
With ergonomic sliding latches, our wide range of pedestrian gates are the perfect addition to your fence-line.
Pedestrian Gates are a staple of traditional parkland fencing, allowing subtle access points between fenced areas. All our gates are all hand made and fabricated in our workshop. We have a number of designs available incorporating traditional patterns as well as more contemporary styles. We are happy to adapt these designs to meet clients requirements, including detail variations on all gates. All of our pedestrian gates can be made to different levels of detail depending on taste and budget.
They are usually set within a run of Estate Fencing and therefore match the dimensions and style of the fence. We offer both single and double pedestrian gates. Single pedestrian gates can be made to any width up to a max of 1.5m and double pedestrian gates can be made to any width up to a 3.6m.
See our gallery below for examples.
EXAMPLES OF STANDARD DESIGNS FOR SINGLE PEDESTRIAN GATES
All of our gates are manufactured by our skilled team of fabricators, engineers or in house blacksmith. All of our standard gates are made from British mild steel and are designed, welded and fettled in our workshop. Each gate is meticulously, designed, manufactured and checked before being either primed for painting, galvanised or cleaned depending on the desired finish.
As with our Estate fencing all of our Estate gates can be finished in bare metal or painted in an RAL colour of your choosing. Any gate that is due to be painted is spray coated with zinc prior to painting, this protects from rust and corrosion in the same manner as galvanising but has a reduced environmental impact. All gates are then given a first coat of paint in the workshop and a second once fitted on site.
